Industrial
Homogenizer
Homogenizer
Features
●
The B- 170 is a rotor/stator type hand held tissue homogenizer which
can rapidly dispersing, homogenizing, extractions, cell disruption,
mixing, emulsifying, suspending samples in 0.1 - 50 ml of liquid or
1-250ml depending on the dispersing shaft. During operation, the
suspended material is drawn into the core of the homogenizer by a rotor
turning at up to 30,000 rpm.The material is repeatedly cycled through
narrow slits in the stator where it is rapidly sheared and disintegrated
by high shear mechanical action. Complete homogenization oftissues
(muscle, liver, breast tissue, etc.) is usually achieved in a few
seconds. Little, if any, heat is produced during the process.
| model | B-170-A | B-170-A |
| Voltage/ Frequency | 220-240V/50-60Hz | |
| Power input/output(W) | 120Watt | |
| speed range(rpm) | 1000-35000rpm | |
| Rotor speed(m/sec) | 5-10m/sec | |
| Speed Setting | 6 speeds | |
| Range(ml,H2O) | 0.2-50ml (Shaft B-170/5) | 30-150ml(Shaft B-170/10) |
| Max viscosity(mPas) | 2,000mPas | |
| Material | stainless steel PTEE | |
| Weight(kg) | 0.6kg | |
| Dimensions(mm) | 55mmx46mmx185mm | |
| noise emission(drive only) | 72dB(A) | |
| Operating Environment | 0-40℃ , 85%rel.humidity | |
| Protection class | IP20 | |
![250G40T430915[1].png](/static/upload/image/20260426/1777165613384194.png)